Operation - Oven
About the Oven
Operation
Setting the Cooking Mode
and Temperature
Automatic Convection Conversion
(models with convection bake)
Hot Oven Indicator
Using the Timer
English 14
CAUTION
Do not use aluminum foil or protective liners to line any part of an appli-
ance, especially surface unit drip bowls or oven bottom. Installation of
these liners may result in a risk of electric shock or fire.
Note: To back out of a current mode, press OFF. (Selecting OFF when not setting
the cooking mode will turn the oven off.)
1. Press COOKING MODE.
2. BAKE will flash in the display.
3. If no change is made within 5 seconds,
control will beep and flash. If this occurs,
press START.
4. To change the cooking mode, turn knob.
5. Press START.
6. The selected mode will appear in the display, along with the default tempera-
ture for that mode, which will be blinking.
7. To select a different temperature, turn knob to the right or left (in 5° incre-
ments) to desired temperature.
8. Press START. If not pressed, oven automatically turns on in 5 seconds.
9. The display alternates between the cooking mode and preheat.
The preheated temperature is displayed, starting at 100ºF. The actual tempera-
ture increases until set temperature is reached, at which point the oven will beep.
10. To change temperature during cooking, press Temperature. Turn the knob to
select new temperature and press START.
11. Once cooking has been completed, press OFF to turn off oven.
In the convection bake mode, the temperature is automatically reduced 25° F
from the package or recipe temperature. Simply enter the package or recipe tem-
perature when setting the mode and the range calculates the correct temperature.
The Automatic Convection Conversion feature can be turned off to allow for man-
ual temperature adjustment. See "Turn Automatic Convection Conversion ON or
OFF" on page 12 for details.
When the Automatic Convection Conversion feature is activated, the display will
read AUTO CONV BAKE. When the feature is turned off, it will read CONV BAKE.
After the oven has been turned off, HOT appears in the display where the cooking
mode was to indicate that the oven is off but still hot. When the oven temperature
drops below 176° F, HOT is no longer seen in the display.
Notes:
•
If you do not finish setting the timer, the oven will beep periodically as a
reminder to set the time. Press OFF to exit the TIMER mode. (Selecting OFF
when not setting the timer will turn the oven off.)
•
Turn the knob to display the time of day or further information about the oven
mode when the timers are in use.
6: 35
380
PM
100
BAKE