Operation - Sonnenkonig FLEX FAN Mode D'emploi

5 Operation

1 2
1. ON / OFF
Press the button once, the fan starts in standard mode at speed 1, the display
shows . Press
2. MODE
Once the fan has started, you can press this button to change the mode. The
control panel will display accordingly: control panel will display accordingly: control panel will display accordingly:
Intelligent mode/ECO mode.
Standard mode: The air speed is constant as determined by the level, 1-12 levels
can be selected.
Sleep mode: The fan blows slowly and quietly, suitable for use during sleep.
Natural mode: The fan simulates natural winds with changes in wind speed that
give the feeling of being in nature.
Intelligent Mode: Based on temperature and wind speed when starting this mode,
the fan changes speed depending on temperature.
3. TIMER
Once the fan has started, press this button to set the timer from 1 to 8 hours.
4. OSCILLATION
When the fan has started, press this button to start or stop the fan oscillation. The
display shows
5. LED
Press this button to adjust the brightness level on the control panel.
3
and to set the fan speed. Press again to turn the unit off .
37
1
2
5
4
Sleep mode or AUTO
Nature mode, Nature mode, Nature mode, Sleep mode or Sleep mode or
EN
4
3