Installing The Worktop - NewAge Products BOLD 3.0 Serie Mode D'emploi

Installing the Worktop

Parts required
1 x Worktop
2 X Washer
(1/4")
Place the worktop between the two racks
resting on the side support brackets. Mark
2
holes of the side support brackets on the
worktop at all corners.
1
2x Wood Screws
1 x Cordless Power Drill
3
1
3
Install two racks one adjacent to the other
with a distance "L (Length of the worktop)"
to install worktop between the two.
L
Drill into the worktop using #8 x 5/8"
Wood Screws and washers on both sides.
17