Safety Warning - NewAge Products BOLD 3.0 Serie Mode D'emploi

Safety Warning

PLEASE READ THIS FIRST
1. Pro Wall Mounted Racks have a rated total load capacity of 2,000 pounds, evenly distributed,
using 3" lag bolts anchored into solid wood studs.
2. Bold Wall Mounted Racks have a rated total load capacity of 1,300 pounds, evenly distributed,
using 3" lag bolts anchored into solid wood studs.
3. Do not load more than the recommended weight capacity per shelf. Live loads (people,pets,
etc.) may weigh less than the rated weight capacity, however will exert force on the rack beyond
it's rated capacity. As such, do not stand, jump or hang from your Wall Mounted Rack.
4. Pro and Bold Wall Mounted Racks must always be installed into structurally sound wall joists
or supports. NewAge cannot be held liable if the Wall Mounted Racks are not Installed correctly
and if it is free standing. NewAge Products Inc. makes no claim to the capacity or strength of the
structure to which the units are mounted.
5. NewAge Products Inc. cannot be held liable for structure failure, or damage or injury
resulting from structural failure.
6. Always inspect the structure of the wall to ensure there are suitable supports.
7. The Wall Mounted Rack is designed for installation into wooden joists and studs. Do not
attempt mounting to steel beams.
8. Ensure all weight is distributed evenly on the rack. Place heavier objects near the perimeter
frame with lighter objects in the center.
9. Do not jump or climb on your Wall Mounted Rack.
10. Do not lean a ladder against the Wall Mounted Rack.
11. Routinely inspect your system to ensure all components are
fastened correctly
12. Make sure to always use a soft and clean cloth that would not
scratch the surface of the Wall Mounted Racks.
13. Do not use any harsh chemicals to clean the metal surface as it
may damage the protective coating / paint.
4