SMC Networks SMC7804WBRB Guide D'installation Rapide page 4

Hardware
The front panel of the SMC7804WBRB includes LED indicators
for easy monitoring.
The following table defines the function of each LED.
LED Status
PWR On
Off
ADSL Sync On
Flashing
Off
ADSL Data Flashing
WLAN Off
Flashing
Ethernet On
(4LEDs)
Flashing
Off
5
Description
The Barricade TM is receiving
power. Normal operation.
Power off or failure.
ADSL connection is syncronized.
The Barricade is establishing an
DSL link.
ADSL connection is not established.
The indicated ADSL port is sending
or receiving data.
No data is being transferred.
The WLAN port is sending or
receiving data.
Ethernet connection is established.
The indicated LAN port is sending
or receiving data.
There is no LAN connection on
the port.
Connecting Devices
LAN Ports
1. Connect computers directly to the SMC7804WBRB on ports 1-4
on the rear panel. If you have more than 4 computers to plug
in, connect a hub or a switch and connect additional computers
to that device. To connect wirelessly refer to the User Guide for
your wireless adapter.
2. Connect supplied RJ-11 cable from ADSL Micro filter/Splitter
to the ADSL WAN port on the SMC7804WBRB.
3. Plug the power cord into the power jack.
WAN Port
Reset Button
Power inlet
6