SMC Networks SMC7804WBRB Guide D'installation Rapide page 14

2. In the [Command Prompt] window, type IPCONFIG/RELEASE and
press the <ENTER> key.
3. Type IPCONFIG/RENEW and press the <ENTER> key. Verify that
your IP address is now 192.168.2.xxx (2-254), your Subnet
Mask is 255.255.255.0 and your Default Gateway is
192.168.2.1. These values confirm that your SMC7804WBRB
is functioning.
4. Type EXIT and press <ENTER> to close the [Command Prompt]
window.
Now that your computer is configured to connect to your
SMC7804WBRB, please skip to please skip to Configuring Your
SMC7804WBRB.
25
Configuring Your Computer with Windows NT 4.0
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup, you need to
configure your computer for connection to your SMC7804WBRB.
1. From the Windows desktop click [Start], then [Settings],
and click [Control Panel].
26