SMC Networks SMC7804WBRB Guide D'installation Rapide page 17

2. In the [Command Prompt] window, type IPCONFIG/RELEASE and
press the <ENTER> key.
3. Type IPCONFIG/RENEW and press the <ENTER> key. Verify that
your IP address is now 192.168.2.xxx, your Subnet Mask is
255.255.255.0 and your Default Gateway is 192.168.2.1.
These values confirm that your SMC7804WBRB is functioning.
4. Type EXIT and press <ENTER> to close the [Command Prompt]
window.
Now that your computer is configured to connect to your
SMC7804WBRB, please continue to Configuring Your
SMC7804WBRB.
31
Configuring Your Macintosh Computer
You may find that the instructions here do not exactly match your
screen. This is because these steps and screenshots were created
using Mac OS 8.5. Mac OS 7.x and above are all very similar, but
may not be identical to Mac OS 8.5.
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup, you need to
configure your computer for connection to your SMC7804WBRB.
1. Pull down the [Apple] Menu. Click [Control Panels] and select
[TCP/IP].
32