SMC Networks SMC7804WBRB Guide D'installation Rapide page 25

ISP use RFC1483 Routing
Enter IP address, subnet mask, default gateway, DNS Server
address and VPI/VCI circuit numbers provided by your ISP.
Click [Next]
to continue and
confirm the settings.
If the parameters are correct Click [Apply] to save these settings.
Your SMC7804WBRB
is now setup.
Go to the section
Troubleshooting of
the User Guide if
you cannot make
a connection to
the Internet.
47
ISP use RFC1483 Bridging
Enter DNS Server address and VPI/VCI circuit numbers supplied by
your ISP. If you have a Fixed IP address you will also need to
enter IP address, Subnet Mask and default gateway address
supplied by your ISP.
Note: You have 3 different bridging modes to select.
48