Installation Check - Lenze ECSDK Serie Instructions De Montage

5

Installation check

5 Installation check
After completing the installation, check ...
The wiring for completeness, short circuit and earth fault.
ƒ
The power connection (X23):
ƒ
–
Polarity of the DC−bus voltage supply via terminals +UG, −UG
The control connection (X26):
ƒ
–
Short−circuiting of charging current limitation depending upon connected
power supply module.
)
Note!
The next step consists of commissioning the drive system.
Relevant information can be found in the detailed documentation of
the connected power supply and axis modules.
62
l
EDKCSDK002 DE/EN/FR 1.1