Calesca Warming/Thawing Device; Intended Use; Important Safeguards - Medela Calesca Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Calesca Warming/Thawing Device

III
This device can both warm and thaw breast milk or supplement in a hospital environ-
ment and operates by circulating heated air in an enclosed chamber which contains
either a breast milk storage container or a syringe. Calesca heats liquids in most com-
monly used containers to approximately 34°C (34°C ± 4°C) – be they frozen, out of
the fridge or at room temperature or thaws it to a refrigerated temperature. The slow
warming process helps preserve nutrients and vitamins.
The device's functions, features, and design are especially developed to fit into NICUs
(Neonatal Intensive Care Units) as a single bedside unit. However, the device can also
be used in the maternity, on the pediatric ward, etc.

Intended Use

IV
Calesca is a device to warm and thaw milk.
• Used to warm breast milk or supplement for hospital patients without the use of
water to an ideal feeding temperature (approximately 34° C).
• Used to thaw breast milk or supplement from a completely frozen state for hospital
patients without the use of water (to a refrigerated temperature).
• Breast milk or supplement can be defrosted and then portioned to be refrigerated
and used during the day.

Important Safeguards

V
When using electrical devices, basic safety precautions should always be followed to
reduce risk of burns, electrocution, fire or injury to persons.
Read all instructions carefully before use.
Product
• Use the product only for its intended use as described in this instruction manual.
• Only use the power cord that comes with the device (choose the correct plug for
your country).
• Keep appliance dry and do not place in direct sunlight.
• Do not place in or drop unit into water or other liquid.
• Only use the Medela components supplied with the unit.
• Do not use accessories not recommended by the manufacturer, as this may create
hazardous conditions.
• Check components for wear or damage.
• To prevent damage to the unit or injury, do not lift or carry unit by its lid.
• There are no user-serviceable parts inside the device. Do not attempt to repair
the device yourself.
• If an IV pole adapter is used with the device, do not overload IV pole with excess
equipment that may cause a tipping hazard.
Electrical
• Make sure the voltage of the device is compatible with the power source.
• Plug the power cord into the device first and then into wall socket.
• Always unplug electrical devices immediately after using.
• Separation from the mains is only assured through the disconnection of the power
cord from the wall socket outlet.
• Keep the power cord and all components away from heated surfaces.
6
EN

Publicité

Table des Matières
loading

Table des Matières