Publicité
Les langues disponibles
Les langues disponibles
s
e t t i n g t h e t i M e a n d M a k i n g a d j u s t
M e n t s
Pull out the crown and turn it counter-clockwise.
1. With the crown in position "A", wind the watch manual-
ly using the crown; rotate the crown clockwise by
making around 30 turns. The watch will subsequently
be automatically rewound by your wrist movements.
2. Pull the winding-stem out to position "B" and rotate
the crown counter-clockwise until the date changes
and hand "4" indicates 2 am (on the 24-hour scale).
3. After unscrewing the protective bolt, press GMT cor-
rector "7" until the date changes; press two more
times on the same corrector to position local time at
1 am. The two indicators (local time and home time)
are now in sync.
4. After unscrewing the protective bolt, press corrector
"9" until the date of the current day is indicated.
5. With the winding-crown in position "B", rotate the
crown in the required direction until the correct time
is displayed.
6. Push the winding-stem back into position "A" (the
movement starts running again).
7. Press lightly on the crown towards the case and tighten
the crown by rotating it clockwise. Also tighten the
bolts of the correctors.
-
Publicité
