Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
4. First remove the 6 screws, followed by the frame.
5. Use a saw to create a recess in the bottom side of the cupboard (at a distance of at least
650 mm from a gas hob). Refer to the measurement drawing for this.
6. Attach the unit with the 10 screws provided.
7. Put the frame into position with the 6 screws.
8. Restore the plug connection of the controls.
9. Put the grease filter into position and close the panel.
EN 15
Publicité
Chapitres
Table des Matières
