Removing The Grease Filters; Replacing The Carbon Filter; Led Lighting - Pelgrim ISWA990 Serie Notice D'utilisation

MAINTENANCE

Removing the grease filters

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
1. Open the panel.
2. Remove the grease filters.
3. Fit the carbon filter by wedging it into the casing.
4. Replace the grease filters.
Note:
Saturation of the activated charcoal will eventually occur after more or less prolonged
use, depending on the type of cooking and how frequently the grease filter is cleaned.
In all cases it is necessary to replace the cartridge at least every four months.
DO NOT wash or reuse the carbon filter. Saturated carbon is not environmentally friendly,
change the filter regularly.

LED lighting

LED lighting may only be replaced by a qualified technician.
The lamp in this household appliance is intended exclusively for lighting this appliance.
The lamp is not suitable for lighting a household area.
EN 12
Switch off the electricity! Remove the plug from the socket or switch the
electricity off at the mains. Open the panel and pull the special handle
to remove the filter.