Thrustmaster T150 FORCE FEEDBACK Mode D'emploi page 2

ENGLISH: Manual firmware update procedure
(Windows 7 / 8 / 8.1 / 10)
On PC, the USB sliding switch on the T150 racing wheel's base
must always be set to the PS3 position!
1) Install the drivers
"PC - DRIVERS FORCE FEEDBACK:
https://support.thrustmaster.com/en/product/t150ffb-en/
During this procedure:
- DO NOT CONNECT the T150 wheel to your PC before being prompted to do so.
The wheel must be connected directly to the computer's USB port. We recommend
-
that you do not use a USB hub for this procedure.
- DO NOT CLICK in any Windows dialog boxes that may appear during the update.
2) Restart the computer.
3a) On Windows 7
In the "Start > All Programs > Thrustmaster > FFB Racing wheel > Control
Panel" menu, verify that your wheel appears under the name "Thrustmaster T150
Racing Wheel".
Thrustmaster T150 Racing Wheel OK