Stihl HSA 66 Notice D'emploi page 18

English
AL 500
Power supply: 120 V / 60 Hz
Rated current: 4.8 A
Power consumption: 570 W
Charge current: 12 A
Insulation: II, E (double
insulated)
Cutting Attachment
Tooth spacing: 30 mm
Stroke rate: 3,000 rpm
Cutting length: 500 mm
Sharpening angle to
horizontal: 35°
Weight
without battery, with cutting attachment,
without blade scabbard
HSA 66: 3.1 kg
Transport
STIHL batteries fulfill the requirements
stated in UN-Manual
ST/SG/AC.10/11/Rev.5 Part III,
Subsection 38.3.
The user can transport STIHL batteries
by road transport to the place where the
machine is to be used without additional
requirements.
The lithium ion batteries included are
subject to the provisions of the
legislation relating to dangerous goods.
16
When shipped by a third party (e. g. air
transport or haulage firm), special
packaging and identification
requirements must be observed.
When preparing the item for shipment, a
dangerous goods expert must be
consulted. Please observe any further
national regulations.
Pack the battery so that it cannot move
inside the packaging.
Further transport instructions - see
www.stihl.com/safety-data-sheets
EMC Compliance Statement for power
tool and charger
This Class B digital apparatus complies
with Canadian ICES-003.
HSA 66