English; Safety Information - Alphacool Eiswolf 2 Mode D'emploi

Eiswolf 2

ENGLISH

SAFETY INFORMATION

READ THE SAFETY INSTRUCTIONS BEFORE STARTING THE INSTALLATION
•
Not suitable for children under 6 years of age (contains small parts that may be swallowed).
•
Do not operate cooling components without ensuring that coolant flows unrestricted.
Insufficient coolant can lead to very hot parts and could cause burns.
•
Coolers devoid of coolant can damage hardware. Always be sure to check your system often.
•
Please note that no tools such as spanners, pliers or similar may be used to tighten the fittings!
Fittings connected to plastic parts can be damaged if over tightened with tools! Cracks or other
damage caused by this as well as damage caused by leaking coolant are not covered by the
warranty!
•
Only use fittings with a sealing O-ring! Due to the sealing ring, tightening by hand is enough! In
exceptional cases, the manual will clearly point out when to use of tools!
•
If not already done, please check the function of your hardware and the cooling system
(tightness, pump function and fan). This will minimize the effort involved in finding possible
sources of error. ALPHACOOL INTERNATIONAL GMBH does not assume the warranty of
the manufacturer of the electronic parts and components. The cooling system is installed at
your own risk.
•
The screws should not be overtightened. If you have overtightened the screws, the retaining
bolts may loosen, and the cooler will no longer be able to rest evenly on them.
•
Fittings with a thread length of 8 mm may result lower flow rates
•
We recommend a leak test before mounting / installing the cooler. The water pressure in the
water cooling circuit must not exceed 0.8 bar.
•
Make sure that the cooler touches all components to be cooled with heat-conducting paste and
/ or heat-conducting pads.
•
Only use distilled water or ALPHACOOL CAPE KELVIN CATCHER (CKC) in your cooling
circuit. Damage caused by unsuitable coolant is not covered by the warranty!
SPECIFIED NORMAL OPERATION
ALPHACOOL INTERNATIONAL GMBH cooling components are only approved for cooling
computer components. The warranty is void if the components are used in any other way.
Warranty
1 Information, drawings, illustrations, technical data, descriptions of weight, dimensions and
performance contained in brochures, catalogues, circulars, advertisements or price lists are for
information purposes only. We assume no liability for the correctness of this information. With
regard to the type and scope of delivery, only the information contained in the order and order
confirmation is decisive.
2 Insofar as a defect covered by warranty exists, you are entitled within the framework of the
statutory provisions to demand subsequent performance, to withdraw from the contract or to
reduce the purchase price. The limitation period for warranty claims for the delivered goods is
two years from receipt of the goods if you are a consumer (§ 13 BGB). If you are an
entrepreneur (§ 14 BGB), the provision that the period of limitation is only one year shall apply.
3 The warranty claim is only valid in connection with the original invoice, the sales receipt or a
confirmation from ALPHACOOL INTERNATIONAL GMBH of the warranty claim.
English
10
Alphacool International GmbH