Rehau RAUTOOL G1 125 Mode D'emploi page 22

RAUTOOL G1 125/160
UNIT DESCRIPTION AND FUNCTIONING PRINCIPLE
Hydraulic unit HMP 1 / RAUTOOL G1 125/160
Motor voltage: 230 V / 50 Hz
Power input:: 0.22 KW
Oil fi lling capacity: 0.4 l
Oil specifi cation: 8 cSt (at 40°C acid-free and water-free)
Remote motor operation: 24 V safety voltage
Delivery rate: 0.28 l/min (theoretically usable 0.33 l/min)
Compression force per
cylinder: 69 KN
Pressure: 550 bar
Piston surface area per
cylinder: 12.56 ccm
Piston stroke per cylinder: 59 mm
Total tool weight: 26 kg (hand-held unit with jaw set
+ reductions)
Pos. No. Unit element
Electric motor
1
Compression cylinder G1
2
Compression cylinder 160
3
Long clamping jaw 160
3a
Short clamping jaw 160
3b
Set reducers 125/160
4
Pins G1
5
Expander head 125 x 11.4
6
7 Expander head 160 x 14.6
Expander set G1
8
Short pins G1
9
Y distributor
10
22
Function
Electro-hydraulic motor for building up pressure in the work unit
Work units for supporting the clamping jaw sets 160 or expander set G1
A set comprising a short and a long clamping jaw.
Movable clamping jaw for the size 160
Fixed clamping jaw for the size 160
Pipe clamps size 125 for clamping jaw set 160. For pressing for size 125.
A set comprising an eccentric and a centric reducer.
Fixing device of the clamping jaw set or expander set on the compression cylinder
Expander for expanding the pipes, size 125 x 11.4
Expander for expanding the pipes, size 160 x 14.6
Expander device for expanding the pipes in connection with the expander head
and the compression cylinder with 2 short pins
Fixing device of the expander set on the compression cylinder
Distributor for connecting the two compression cylinders with the electric motor
for the pressing process
2
4
5
10 9
1
3a
3b
8
7
6