Replacement Parts - Eaton Crouse-Hinds Champ VMV Serie Instructions Pour L'installation Et L'entretien

MAINTENANCE
1. Perform visual, electrical, and mechanical inspections
on a regular basis. The environment and frequency
of use should determine this. However, it is
recommended that checks be made at least once
a year. We recommend an Electrical Preventive
Maintenance Program as described in the National
Fire Protection Association Bulletin NFPA No. 70B:
Recommended Practice For Electrical Equipment
Maintenance (www.nfpa.org).
2. The lens should be cleaned periodically to ensure
continued lighting performance. To clean, wipe the
lens with a clean, damp cloth. If this is not sufficient,
use a mild soap or a liquid cleaner such as Collinite
NCF or Duco #7. Do not use an abrasive, strong
alkaline, or acid cleaner. Damage may result.
3. Visually check for undue heating evidenced by
discoloration of wires or other components, damaged
parts, or leakage evidenced by water or corrosion
in the interior. Replace all worn, damaged, or
malfunctioning components, and clean gasket seals
before putting the luminaire back into service.
4. Electrically check to make sure that all connections
are clean and tight.
5. Mechanically check that all parts are properly
assembled.
6. If the lens is removed from the fixture, the lens
gasket must be replaced to maintain restricted
breathing ratings.

REPLACEMENT PARTS

Crouse-Hinds VMV Series Champ Luminaires are designed
to provide years of reliable lighting performance. However,
should the need for replacement parts arise, they are
available through your authorized Crouse-Hinds distributor.
Assistance may also be obtained through your local
Crouse-Hinds representative.
Crouse-Hinds Sales Service Department, P.O. Box 4999,
Syracuse, New York 13221, Phone (315) 477-7000.
IF 1701 • 04/14 Copyright © 2014, Eaton's Crouse-Hinds Business
All statements, technical information and recommendations contained herein are based on information and
tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. In accordance with
Crouse-Hinds "Terms and Conditions of Sale," and since conditions of use are outside our control, the purchaser
should determine the suitability of the product for his intended use and assumes all risk and liability whatsoever in
connection therewith.
Page 5
Eaton's Crouse-Hinds Business
1201 Wolf Street, Syracuse, New York 13208 • USA
Copyright © 2014
IF 1701
Revision 1
New 04/14