Cleaning Your Vacuum Cleaner - Rowenta Silence Force Extreme RO59 Serie Mode D'emploi

Masquer les pouces Voir aussi pour Silence Force Extreme RO59 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RO_ASPIRATEUR_SFE_NAFTA_733284-01_Nafta 02/12/13 10:12 Page5
CLE NING ND M INT INING
The air we breathe contains particles that can be
allergenic: larva and dust mite, feces, mold,
pollen, smoke and animal waste (hair, skin,
saliva, urine), etc.
The finest particles can penetrate deep inside
the
respiratory
inflammation and affect the entire respiratory
system.
(H)EPA ([High] Efficiency Particulate Air Filter)
filters retain the finest particles.
Thanks to the (H)EPA filter, the air released into
the room is cleaner than the air suctioned.
IMPORT NT lways switch off and unplug
your vacuum cleaner before servicing it.
1 • Changing the bag Wonderbag
UNIVERS L
The change bag light tells you that the bag is
full or saturated. If you notice that your vacuum
cleaner is not working as well as it should be,
turn the power up to maximum and hold the
lifted nozzle above the floor. If the light stays
red, replace the bag.
IMPORT NT Wonderbag COMP CT bags
can't be used on this appliance. Using them
could damage the vacuum cleaner and may
void the appliance guarantee.
Open the cover to your vacuum cleaner
(Fig.14).
Remove the bag support from the bag
compartment (Fig.15).
Remove the Wonderbag bag from the bag
support (Fig.16).
Throw the Wonderbag bag away (Fig.17).
Place a new Wonderbag bag in the bag support
using its ring (Fig.18).
Place the bag support in the bag compartment
and fit the bag inside the compartment (Fig.19).
Make sure that the bag is correctly positioned
before closing the cover.
IMPORT NT Never operate the vacuum
cleaner without a bag.
For your peace of mind your vacuum cleaner
is fitted with a safety system which tells you
that the bag is inside (the cover won't close
unless you've put the bag in).
* ccording to model: these systems are specific to certain
models or are accessories available as an option.
system
or
can
cause
2 • Changing the HEP filter cassette
(ref. ZR0029)
IMPORT NT Replace the filtration system
once a year.
Open the cover to your vacuum cleaner
(Fig.14). Remove the bag support from the bag
compartment (Fig.15), then remove the HEP
filter cassette (Fig.20) and throw the cassette
into a bin (Fig.21).
Fit the new HEP
compartment (Fig.22)
Put the bag support back into the compartment
(Fig.19).
Make sure that the HEP
correctly positioned before closing the cover.
IMPORT NT Never use the vacuum
cleaner without a HEP filter cassette.
For your peace of mind your vacuum
cleaner is fitted with a safety system which
tells you that the HEP cassette filter is in
place (the cover won't close unless you've
put the HEP ) filter cassette in.
3 • Cleaning your vacuum cleaner
Wipe the body of the appliance and the
accessories with a soft cloth. Do not use
detergents, chemical or abrasive products.
5
filter cassette into its
filter cassette is
EN

Publicité

Table des Matières
loading

Table des Matières