Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Nilfisk cfm S2 Manuel D'instructions

S2 / S3

Vacuum Cleaner Parts and Labels

1. Model code, Technical Specifications (see table on page
6), Serial N°., CE Mark, Year of manufacture, Nominal
voltage.
2. Dust container
3. Dust container release lever
4. Inlet
7. Accessories compartment
9. Exhaust air outlet
10. Attention plate: Draws the operator's attention to
the fact that the filter must only be shaken when the
vacuum cleaner is turned off (see also par. "Primary filter
shaker").
11. Plug for connecting the vacuum cleaner to an electrical
socket.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (4 - Fig. 1) and blown out through the
exhaust outlet (9 - Fig. 1).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Centre).
The diameters of the authorized hoses are given in the
technical specifications table.
The vacuum cleaner is equipped with a primary filter which
enables it to be used for the majority of applications.
Besides the primary filter, which retains the most common
types of dust, the vacuum cleaner can be fitted with a HEPA
filter with a higher filtering capacity for fine dusts and dusts
that are hazardous to health.
US
C344

Vacuum cleaner description

Figure 1
Figure 2

Optional kits

Please contact the manufacturer's sales network for
information on optionals.
Instructions for installing the optionals are included in the
conversion kit.
WARNING!
Use only supplied and authorized genuine spare parts.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorized by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
S2
Model
(50L)
A (in) 27.6
B (in) 33.9
C (in) 68.9
Weight with
176
packaging (lbs.)

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
4
Figure 3
S3 S3
(50L) (100 L)
27.6 27.6
33.9 33.9
68.9 68.9
190 196
02/2013