VHO200
Labels
1
Identification plate:
Code of the model, technical specifications, serial
number, CE marking, year of manufacture
2
Liquid container
3
Controls (switches)
4
Inlet
5
Vacuum/blower units
6
Liquid container clamp
7
Diverter valve control
8
Liquid level indicator tube
9
Liquid discharge valve
10
Safety filter
11
Float for stopping liquids
Vacuuming of liquids
The machine vacuums the liquids and deposits them into the
container (2).
Vacuuming of liquids and shavings
When the machine vacuums the material (shavings and
liquids) which was produced during the machining process,
the solid part is kept in the chip basket whereas the liquid part
flows into the liquid container underneath (2).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet (4) and then fit the required tool on to the other
end of the hose (refer to the manufacturer's accessory catalog
or Service Center).
The float (11) stops the vacuuming operation (the vacuuming
units remain activated) when the liquid container (2) is full; it
is then necessary to turn off the vacuum cleaner and to empty
the liquid container (2).
GB
09/2014
Vacuum cleaner description
Figure 1
Optional kits
Various optional kits are available for converting the vacuum
cleaner:
■
Liquid collection kit
For collecting fluids only
■
Chip basket filter
It collects finer shaving in chip basket
On request, the vacuum cleaner can be supplied with optional
kits already installed. However, they can also be installed at a
later date.
Please contact the manufacturer's sales network for further
details.
Instructions for installing the options are included in the
conversion kit.
WARNING!
Use only genuine options kits supplied and authorized
by the manufacturer.
Accessories
Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and authorised
by the manufacturer.
Packing and unpacking
Dispose of the packing materials in compliance with the laws
in force.
Model
A (mm)
VHO200
700
4
Figure 2
B (mm)
C (mm)
1200
1500
kg
75