Help And Specifications; Secondary And Inactive Stations; Troubleshooting; Technical Specifications - PURE milano Manuel De L'utilisateur

Help and specifications

Secondary and inactive stations

Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. A secondary service has a '<<' before its name in the
station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations are those which appear on the station list but are not currently
available. Inactive stations have a '?' before their name on the station list. If you select a station
which has this symbol, your radio tries to tune in or returns to the previous station.

Troubleshooting

Display says 'No stations available'
Use Autotune (page 10) to search for stations. Try adjusting your aerial or radio position.
Receiving new DAB stations that have started broadcasting
Use Autotune (page 10) to scan for new stations. Any new stations that you can receive will be
added to the station list.
Resetting your radio
Resetting your radio removes all presets and stored stations and resets all options to defaults.
1. Press and hold the Menu button for three seconds.
2. Press Select to confirm the reset or press no buttons to cancel the reset.

Technical Specifications

DAB Digital radio with full Band III and FM RDS reception. ETSI EN 300 401 compliant
and capable of decoding all DAB transmission modes 1-4 up to and including
256 kbps. DAB+ supported as standard.
Frequency ranges DAB Band III 174–240 MHz, FM 87.5–108 MHz.
Audio 3" full-range speaker. 1.7W RMS amplifier. Active speaker equalization filter.
Input connectors 5.5V DC power adaptor socket (230V supplied). USB connector for upgrades.
Output connectors 3.5mm stereo output for headphones.
LCD Display 16 x 2 characters, plus additional function icons. Auto-dimming backlight.
Mains power 230V AC to 5.5V (1A) DC external power adapter (supplied).
Power consumption Standby: 0.9 Watt. Active: 2.4 Watts average dependent on use.
Approvals CE marked. Compliant with the EMC and Low Voltage Directives 2004/108/EC
and 2006/95/EC).
Aerial Wire aerial attached.
Dimensions (mm) 135 wide x 150 deep x 58 high.
Help and specifications
12