Alarms Snooze And Sleep - PURE Elan DAB+ Mode D'emploi

Alarms snooze and sleep

As well as a clock/calendar, there are two versatile wake-up alarms with snooze facility, and a sleep function
to turn the system off after a set period of time. The alarm sound for each alarm can use a buzzer or a Digital
Radio or FM Station.
To set the clock/calendar
The settings for the internal clock and setting Alarm, Snooze and Sleep function are all accessible via the
Systems Setting menu.
Alarms
Note: Alarms will only function when the Elan DAB+ unit is On or in Standby mode.
An active alarm is indicated by its icon in the bottom line of the display.
To set alarms
Press Menu then use the Select control button to select System Settings - Alarm and then select
the required Alarm 1 or 2.
To exit alarm setting mode, press Menu or Back (alternatively, the Alarm display will timeout and
automatically return to the Now Playing screen after a short time).
The alarm setup prompts you for the following parameters. Select a value for each parameter
in turn by turning the select control button and press Select to confirm and move on to the next
parameter.
Parameters
I
In all listening modes active alarms are indicated by displaying the relevant Alarm 1 and/or Alarm
2 icons.
At the set time, the alarm will sound, quietly at first, then gradually building up to the set volume.
When an alarm sounds, the icon in the display flashes.
To cancel a sounding alarm and switch the radio to standby long press the Select button
Snooze
To temporarily silence a sounding alarm, short press the Select button.
You can change the snooze period by repeatedly pressing the select button. Snooze periods are
5, 10, 15 and 30 minutes.
The radio returns to standby for the set time period with a snooze countdown displayed. When
the countdown reaches 0 (zero) the alarm is triggered again.
Long press the 'Select, button to fully cancel a sounding alarm and switch the radio to standby.
Alarm – Off | On
Frequency - Daily | Once | Weekends | Weekdays
Choose the days on which the alarm is active.
Note: if you choose 'Once' , you are prompted to enter the required date.
Wake Up time – hours and minutes
Source – Buzzer | Digital Radio | FM
If Digital radio or FM is chosen as the audio source a Preset Menu is
displayed which allows you to select the station.
Duration – 15 | 30 | 45 | 60 | 90 | 120 minutes
If the alarm is not cancelled Elan DAB+ returns to standby after this time
period.
Volume – rotate the top control button to set the required alarm volume.
This is the volume the alarm will build up to. (Initially the alarm sounds at
a low volume and gradually gets louder to the set volume).
EN