Listening To Your System; Basic Operation; Auto Playback - Pioneer HTP-SB300 Mode D'emploi

04

Listening to your system

Chapter 4
Listening to your system
Important
• The listening modes and many features
described in this section may not be
available depending on the current source,
settings and status of the system.

Basic operation

Procedures for listening to audio from the
connected component.
SYSTEM
SYSTEM
INPUT
INPUT TV CONTROL
HDMI1 HDMI2
OPTICAL COAXIAL INPUT
TV CODE
STANDARD ADV SURR
AUTO/ STEREO/
DIMMER
DIRECT A.L.C.
LISTENING MODE BD MENU
1 Turn on the power of the playback
component.
Press  SYSTEM to turn on the power of
2
this system.
3 Select the source you want to playback.
Use INPUT SELECT (or front panel INPUT)
buttons.
4 Start playback of the component you
selected in step 1.
5 Select the listening mode.
Use the listening mode buttons.
Note
1 Stereo surround (matrix) formats are decoded accordingly using DOLBY PLII MOVIE (see Listening in surround
sound above for more on these decoding formats).
2 For more options using this button, see Using Stream Direct on page 22.
20
Downloaded From TheatreSystem-Manual.com Manuals
En
All manuals and user guides at all-guides.com
SOURCE
ENTER
CH
VOL
6 Press MASTER VOLUME +/– to adjust the
volume.

Auto playback

The simplest, most direct listening option is the
Auto Surround feature. With this, the system
automatically detects what kind of source
you're playing and selects multichannel or
stereo playback as necessary.
• While listening to a source, press AUTO/
2
DIRECT for auto playback of a source.
Press repeatedly until AUTO SURROUND
shows briefly in the display (it will then show
the decoding or playback format). Check the
digital format indicators in the display to see
MUTE
how the source is being processed.
1
TV CODE
STANDARD ADV SURR
AUTO/ STEREO/
VOL
DIMMER
DIRECT A.L.C.
LISTENING MODE BD MENU