Preparing The Subwoofer; Wall Mounting The Main Unit - Pioneer HTP-SB300 Mode D'emploi

Masquer les pouces Voir aussi pour HTP-SB300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

Preparing the subwoofer

Attach the non-skid pads to the base of
subwoofer.
Use the supplied adhesive to attach four pads
to the base of subwoofer.
• The subwoofer has been designed for
normal use when placed on its side as
shown. If installing the subwoofer
vertically, affix the non-skid pads to the side
of the subwoofer as indicated in the
accompanying illustration.
Downloaded From TheatreSystem-Manual.com Manuals
All manuals and user guides at all-guides.com
For vertical installation
Pioneer logo

Wall mounting the main unit

The main unit can be mounted on a wall if
desired. Before performing a wall mounting,
consult page 11 and complete the wiring
connections.
Caution
• Remember that the main unit is heavy and
that its weight could cause the screws to
work loose, or the wall material to fail to
support it, resulting in the unit falling.
Make sure that the wall you intend to
mount the unit on is strong enough to
support them. Do not mount on plywood or
soft surface walls. If you are unsure of the
qualities, consult a professional for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation, misuse or
modification of the product, or natural
disasters.
• Mounting screws and washers are not
supplied. Use screws suitable for the wall
material and support the weight of the unit.
Recommended dimensions are for a screw
4 mm in diameter and 50 mm long, with a
washer 10 mm in diameter.
Screw (not supplied):
50 mm
Washer (not supplied):
maximum Ø 10 mm
Ø 4 mm
Ø 10 mm
01
9
En

Publicité

Chapitres

Table des Matières
loading

Table des Matières