France Air ECM Notice Technique page 47

4.9.3. CHANGING FROM A VERTICAL DISCHARGE TO A HORIZONTAL DISCHARGE
Procedure:
4- Unscrew the M6X30 screws from the following plates
a. Horizontal take-off plate, on discharge
b. Vertical blanking plate
5- Using the M6X30 screws, screw the blanking plate in the horizontal position in place of the
take-off plate
6- Using the M6X30 screws, screw the take-off plate on the discharge, in the vertical position.
NT 1963 E – 07/2020 _______________________________________________________________ 47