Storage And Handling - SDCEM MR41E Notice D'installation Et De Maintenance

TYPE OF EQuIPMENT TO bE STORED: INDOOR / OuTDOOR
3 types of packaging are used :
• SEI 3: packaging in crates or film-coated on pallets.
• SEI4a: seaworthy packaging (crate with plywood walls or wooden bound case).
• SEI4c: seaworthy packaging in sealed cover and with humidity absorbers
uNPACkING, HANDLING
Handle and unpack the equipment with care, in particular :
• Ensure that slinging does not damage those parts of the devices susceptible to deformation.
• Check that all the devices have been taken out of the crate.
• On no account must devices delivered disassembled be moved assembled.
WEIGHT
Without braket
Minimum weight for an operating mechanism is 30kg. Refer to the instructions for the
hoisting means used.
With bracket
Handling instructions

STORAGE AND HANDLING

(crate with plywood walls or wooden bound case).
Type of
packaging Length
SEI 3 and SEI 4a • 1 month
• 1 month
• 12 months
SEI 4c • 6 months
• 6 months
• 12 months
After 12 months, consult us to adapt equipment storage conditions to equipment site.
Stacking forbidden
Storage / Handling / Weight
Indoor equipment
- In original packaging
- In ventilated, dry place
- Into bottom case
- In ventilated, dry place
- Supply the anti-condensation
resistance of electrical or manual
operating mechanisms
- In the original packaging and sheltered
- No specific conditions
- Into bottom case
- Caution: remove the plastic cover
- In ventilated, dry place
- Supply the anti-condensation resistance of electrical and manual
operating mechanisms and of switchgear cubicles.
Operating mechanism
type MR41E
Outdoor equipment
- In original packaging
- Into bottom case
- Store operating mechanisms
in vertical position
- Supply the anti-condensation
resistance of electrical or manual
operating mechanisms
NTI010hA
PAGE
06