Bpt TA/P1 Mode D'emploi page 14

IT
EN
DE
FR
ES
2
PT
14
2
1
Installation
Install the unit in a position which is suita-
ble for correct room temperature measure-
ment. Avoid installation in alcoves, behind
doors or curtains, or near heat sources
(fig. 1).
The device must be installed within a 3
module recessed back-box (depth 50 mm).
Proceed as follows:
1
• Make the connections.
• Paying attention to the UP direction indi-
cation, use the two screws supplied to
mount the unit to the back-box (fig. 2).
Should the necessity arise to change the
support (or the cover) proceed as indicated
in figures 3, 4, 5.
Choose the support (A, B, C or D) and the
cover depending on the front plate to be
fitted.
2
3
4 5