Storage Of The Device - OPTIMEO OPC-A01-160HP Manuel D'utilisation

The evacuation process shall be carried out prior to returning the compressor to the suppliers.
Only electric heating to the compressor body shall be employed to accelerate this process.
When oil is drained from a system, it shall be carried out safely.
Fuse parameters of the unit
Type: 5ET or 932 or 5H Voltage: 250V Current: 3.15 A

Storage of the device:

a)
1: Unscrew the drain plug and remove the rubber plug, then empty the water into a container.
You can tilt the device slightly for this purpose.
2: Turn the machine on, set it to the slow ventilation mode and let it run until the drain pipe is
dry, so that the inside of the machine body remains dry and free of mould.
3: Turn off the machine, unplug the power outlet and wrap the power cord around the power
pole; replace it with rubber and the drain plug.
4: Remove the heat drain and store it carefully.
5: Cover the air conditioner with a plastic bag. Place the air conditioning in a dry place, keep it
out of the reach of children and make sure it is not in a dusty environment.
6: Remove the batteries from the remote control and store them carefully.
Note: Make sure the appliance is placed in a dry place and carefully store all machine
components.
XI. Repair
Do not repair or disassemble the air conditioning by yourself. Unqualified repair will lead to
failure of the warranty card, and may cause damage to users or their properties.
21