Memory Function; Operation Instructions Of Remote Control; Protection Function; Frost Protection Function - OPTIMEO OPC-A01-160HP Manuel D'utilisation

6. DOWN Key: Under timer mode, press this key to adjust the timer downwards.
Under cooling and heating mode, press this key to adjust the temperature lower.
This function is not available under FAN mode and DEHUMIDIFYING mode.
7. Mode Key: When the unit is on, press this key to switch between cooling
heating mode.
8. Sleep Mode: When the power is on and in cooling mode (or heating mode), press 'SLEEP'
button to start the sleep mode. Under sleep mode, the FAN speed is set to LOW speed and not
adjustable.
The SLEEP mode can be canceled by pressing the button.
When sleeping mode turns on , under cooling/heating mode, one hour later, setting
temperature will go up/ go down 1ºC, the second one hour later, setting temperature will go
up/ go down another 1ºC, and then keep the same.
Under the sleep mode, display will be turned off after 10 seconds.
Sleeping mode is invalid under dehumidifying and fan mode.
Power Key: Press this key to turn on and turn off the unit.
Noted:
MEMORY FUNCTION: The appliance maintains its settings during a power failure.
b) Operation instructions of remote control
The air conditioner can be controlled with the remote control. Two AAA-batteries
are required to use the remote control.
POWER : Press the POWER button to turn the unit on and off.
MODE : Press the MODE button to switch between cooling, dry, fan,
heating modes.
UP : Press the UP button to increase the desired temperature and set the
duration of the timer.
DOWN : Press the DOWN button to reduce the desired temperature and set
the duration of the timer.
FAN : Press the FAN button to cycle between low, medium and high fan speeds.
TIMER : Press the TIMER button to set the duration of the power on or power off timer.
SWING : Press the swing button to change the orientation of the louver to direct the air
TEMPERATURE UNIT
Fahrenheit.
SLEEP MODE : Press to turn on the sleep mode. The unit will work with energy saving logic
and the lowest fan speed.
V. Protection function

1. Frost Protection Function:

In cooling mode, if the temperature of the exhaust pipe is too low, the unit will automatically
enter protection status; if the temperature of the exhaust pipe rises to a certain temperature, it
: Press to switch between displaying the temperature in Celsius and
10
dry fan