Overflow Protection Function; Automatic Defrosting (Heating Models Have This Function); Protection Function Of The Compressor; Installation And Adjustment - OPTIMEO OPC-A01-160HP Manuel D'utilisation

can automatically revert to normal operation.

2. Overflow Protection Function:

When water in the water pan exceeds the warning level, the unit will automatically sound an
alarm, and the "FULL" indicator light will flash. At this point, you need to move the drainage pipe
connecting the unit or the water outlet to sewer or other drainage area to empty the water
(details see Drainage Instructions at the end of this chapter). After the water is emptied, the unit
will automatically return to the standby.

3. Automatic Defrosting (heating models have this function):

The unit has an automatic defrosting function. Defrosting can be achieved through four - way
valve reversing.

4. Protection Function of the Compressor

To increase the service life of the compressor, it has a 3-minute delay booting protection
function after the compressor is turned off.
VI. Installation and adjustment

1. Installation

Warning: before using the unit, keep it upright for at least two hours.
The unit can be easily moved in the room. In the moving process, ensure that the unit is in
the upright position and should be placed on a flat surface. Do not install and use the unit in
the bathroom or other humid environments.
Install the heat pipe assembly
Figure 1
1 take out the outer connector assembly and the exhaust pipe assembly, and remove the plastic
as shown in Fig.1
11