Control Setting; Control Panel Operation Instructions; Operation Interface - OPTIMEO OPC-A01-160HP Manuel D'utilisation

IV. Control Setting

1. Control panel operation instructions

a) Operation interface
Swing Key
Display Window
Power Key
1. SWING Key: The SWING function only works after turning on the unit, you can turn the swing
on or off.
2. TIMER Key: When the unit is on, press the key to close timing; When the unit is off, press the
key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the required
timing value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by one hour.
3. FAN SPEED Key: In cooling, heating and fan mode, press this key to select low, medium, high
speed. This function is not available in SLEEP mode and DEHUMIDIFYING mode.
4. UP Key: Under timer mode, press this key to adjust the time upwards.
Under cooling and heating mode, press this key to adjust the temperature higher.
This function is not available under FAN mode and DEHUMIDIFYING mode.
5. Display Window
Timer Key
Down Key
9
Fan Key Up Key
Mode Key Sleep Mode Key