Disposal And Environmental Protection - mspa BAIKAL Manuel D'utilisation

1. Clean and dry the area to be repaired thoroughly
3. Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes
NOTE:
1
Storage and Prepare for the Next Time Use
2. Reserve the set-up instructions to deflate and
disassemble the spa tub, spa control unit and air
bladder.
3. Before storage, make sure all the spa components
and accessories are thoroughly clean and dry.
Air-dry the spa tub in the mild sun for an hour
before folding.
4. Fold the spa tub loosely and avoid any sharp
corners to prevent damage or leakage to the spa liner.
5. Prepare new additional cartridge for next time use.
storage location.
7. Original packaging is recommended to be used for storage.

DISPOSAL AND ENVIRONMENTAL PROTECTION

2
pin hole pin hole
This marking indicates this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources. You can obtain information on disposal from your local
authorities.
To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for
environmental safe recycling.
SUN
22
3
®