Rapid Access To Alu - Accu-Turn 1220 Manuel De L'opérateur

56
All manuals and user guides at all-guides.com
Operations
5.4.6
The function allows you to set up the machine so
that you have faster access to the common wheel
operating modes: Standard, ALU 4, ALU 5.
The machine saves the function in the memory even
when it is switched off. To remove the function and
restore the initial condition, repeat the operations you
used to activate it:
• Power up the machine.
• When the power up stage is complete, press the
ALU button for at least three seconds, then release
it.
• Start the operation.
The Rapid Access function is ON.
Each time you press the ALU key, the unit cyclically
scrolls through the STANDARD – ALU 4 – ALU 5
modes only. In this way, operation is speeded up for
the statistically more frequent operations on the wheel.
Note: The function (ON / OFF) status is only saved
Operator's Manual
Rapid access to ALU S
after you start an operation.
ACCU 1220