Counter Functions - Accu-Turn 1220 Manuel De L'opérateur

52
All manuals and user guides at all-guides.com
Operations
5.4.4
This section covers the use of counters, important
for analysing the history of unit processes.
The machine saves a large amount of data
accumulated from the functions previously performed.
Even after a short period of work, thanks to this
function, you can poll the machine and obtain data
useful for statistical purposes regarding work done in
the workshop, or for machine maintenance.
You can call up the Control Counters function at any
time, without compromising any data set. As output
the displays again show what was present at the
moment you accessed the function.
- Operation.
• Press the F – FINE keys simultaneously. The
display shows "SEL ECt". Hold down until "BAL Sht"
appears, accompanied by an acoustic signal.
• Press the + or – key to obtain "Cou nt" on the display.
• Press the F key.
• Press the + or – key to scroll through the counters,
until you reach the one you want.
See the list below for interpretation of the data supplied
by the counters available.
1 total counter for all spins
2 counter for spins with OK
3 counter for spins in minimization
4 counter for spins in service mode
5 counter for spins since last calibration
To exit the Control Counter mode, press the STOP
key twice. The displays again show the previous data
and the counterweight application LEDs highlight the
normal balancing mode (internal/external clip weights).
Operator's Manual

Counter Functions

ACCU 1220