Table des Matières
Publicité
Overview
1. Gimbal Connector
2. Pan Motor
3. LiDAR
4. RGB Mapping Camera
5. Auxiliary Positioning Vision
Sensor
6. microSD Card Slot
7. Tilt Motor
8. Roll Motor
Installation
1. Remove the gimbal cap and lens protector.
2. Press the button on the aircraft used for detaching the gimbal and camera. Rotate the gimbal cap on
the aircraft to remove.
3. Align the white dot on the gimbal with the red dot on the aircraft and insert the gimbal.
4. Rotate the gimbal lock to the locked position by aligning the red dots.
1
1
4
8
7
6
3
2
1
2
3
4
5
Publicité
Table des Matières
