English (GB) Installation and operating instructions
Original installation and operating instructions
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
Warning
Prior to installation, read these installation
and operating instructions. Installation and
operation must comply with local
regulations and accepted codes of good
practice.
Advanced IO
http://net.grundfos.com/Appl/
ccmsservices/public/literature/filedata/
Grundfosliterature-5768592.pdf
1. General information
1.1 Symbols used in this document
Page
Warning
3
If these safety instructions are not
3
observed, it may result in personal injury.
3
Warning
4
4
If these instructions are not observed, it
may lead to electric shock with consequent
7
risk of serious personal injury or death.
8
8
Warning
9
The surface of the product may be so hot
11
that it may cause burns or personal injury.
12
13
If these safety instructions are not
15
Caution
observed, it may result in malfunction or
damage to the equipment.
16
16
Notes or instructions that make the job
22
Note
easier and ensure safe operation.
22
22
2. Receiving the product
22
24
Check the condition of the inverter before
24
installation. Please do not install the
Caution
inverter if the equipment appears to be
24
damaged.
If any deviation from the order is found, please
contact Grundfos. Once you get the product, please
perform the following inspections before installation:
Inspection item
Consistency with
ordered product
Damage or scratches
Completeness of main
inverter and accessories
Are fastening parts,
such as screws,
tightened properly
Inspection method
Inspect the product's
nameplate
Inspect the product
visually
Check carefully
according to the product
list
Check with screwdriver,
if necessary
3