Table des Matières
Publicité
_______________________________________________________________
Manufacturer
Our products are manufactured in compliance with
applicable international standards and regulations.
The manufacturer hereby confirms that the following
products:
Air handling units
Rotovex SR03 HW, Rotovex SR03 EL
Rotovex SR04 HW, Rotovex SR04 EL
Rotovex SR06 HW, Rotovex SR 06 EL
Comply with the following EC-directives:
EC Declaration of Conformity
as defined by the EC Machinery Directive
98/37/EEC, Annex II A. Fans for ventilation in air
handling systems with air from non-explosion
hazardous premises. This machinery must not be put
into operation until prior to reading mounting
instructions and safety information.
The following harmonized standards are in use:
EN 60 034-1 Rotating electric machinery; ratings and
performances.
EN 60 204-1
Safety of machinery; electrical equipment of
machines; general requirements.
EN 292-1
Safety of machinery; basic concepts, general
principles for design.
EN 294
Safety of machinery; safety distances to prevent
danger zones reached by the upper limbs.
Remark: EN 294 only complies when fitted contact
safety device is part of the extent of delivery.
_________________________________________________________________________________________________________
Rotovex SR03, SR04, SR06
205574
Systemair AB
Industrivägen 3
SE-739 30
Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
EC Declaration of Conformity
As defined by the EC Low Voltage Directive
73/23/EEC and 93/68/EEC
The following harmonized standards are in use:
EN 60 335-1
Electric domestic products and similar – safety-
general requirements.
EN 60 335-2-40
Safety of household and similar electrical appliances -
Part 2-40: Particular requirements for electrical heat
pumps, air-conditioners and dehumidifiers.
EN 50 106 Electric domestic products and similar-
Safety-Instructions for control of manufacture.
Remark: EN 50 106 complies for internally wired
products only.
EC Declaration of Conformity
As defined by EC's EMC-directive 89/336/EEC,
92/31/EEC and 93/68/EEC
The following harmonized standards are in use:
EN 61000-6-4: Electromagnetic compatibility (EMC) -
Part 6-4: Generic standards - Emission standard for
industrial environments.
EN 61000-6-2 Electromagnetic compatibility (EMC) –
Part 6-2: General requirements – Immunity for
appliances in industrial environments.
The complete technical documentation is available.
Skinnskatteberg, 07 February 2008
Mats Sándor
Technical Manager
Instructions de mise en route et maintenance
Systemair AB
Publicité
Chapitres
Table des Matières
