Navman REPEAT 3100 Notice De Montage Et D'utilisation page 9

REPEAT 3100 wiring example
In this example, the REPEAT 3100 receives data from a NAVMAN WIND 3100 and a SPEED 3100 via the
NavBus. Any number of NAVMAN instruments can be connected to the NavBus and send data to the
REPEAT 3100.
The REPEAT 3100 also receives NMEA data from a GPS and a compass. One more NMEA instrument could
be connected to the third NMEA input on the REPEAT 3100.
Wire any more REPEAT 3100s in parallel with the first.
NAVMAN NavBus Instruments
WIND 3100 SPEED 3100
Other Other
wiring wiring
Orange
Blue
Use optional junction boxes to simplify wiring, (see
right). For information on how to connect NavBus
and to use junction boxes, refer to the NavBus
Installation and Operation manual.
Tip: Daisychain the power wires between
instruments or groups of instruments.
NAVMAN
REPEAT 3100 Installation and Operation Manual
NMEA Instruments
GPS
Other Other
wiring wiring
NMEA
output
It does not matter which NMEA
output is connected to which
REPEAT 3100 NMEA input
Orange
Blue
REPEAT 3100
Compass
Three
NMEA
inputs
NMEA
output
Green
White
Yellow
Unused
NMEA
input
NavBus wires
Group 1
Power/data cables
Group 2
Power/data cable
Wire multiple REPEAT
3100 in parallel
Switch Fuse
+
12 V DC
Red
power
-
Black
Green
White
Yellow
NavBus
connections
Orange
Blue
Junction box
NavBus cable
Junction box
To next cluster
Red
12 V DC
power
Black
(see left)
Orange
Blue
Power & data
connections
Power & data
connections
9