Regulatory Compliance - Clarity Professional C4210 Mode D'emploi

REGULATORY COMPLIANCE

Part 68 of FCC Rules Information
a) This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that
contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the
telephone company.
b) A plug and jack used to connect this equipment
to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA.A compliant
telephone cord and modular plug, RJ11C USOC,
is provided with this product. It is designed to be
connected to a compatible modular jack that is also
compliant. See installation instructions for details.
c) The REN is used to determine the number of
devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In
most but not all areas, the sum of RENs should not
exceed five (5.0).To be certain of the number of de-
vices that may be connected to a line, as determined
by the total RENs, contact the local telephone com-
pany. For products approved after July 23, 2001, the
REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without
a decimal point (e.g., 03 is a REN of 0.3). For earlier
products, the REN is separately shown on the label.
d) If this telephone equipment causes harm to
the telephone network, the telephone company will
notify you in advance that temporary discontinuance
of service may be required. But if advance notice isn't
practical, the telephone company will notify the
40
REGULATORY COMPLIANCE
customer as soon as possible.Also, you will be
advised of your right to file a complaint with the
FCC if you believe it is necessary.
e) The telephone company may make changes
in its facilities, equipment, operations or procedures
that could affect the operation of the equipment. If
this happens the telephone company will provide
advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
f) If trouble is experienced with this telephone
equipment, for repair or warranty information, please
contact Clarity, 1-800-552-3368. If the equipment is
causing harm to the telephone network, the tele-
phone company may request that you disconnect the
equipment until the problem is resolved.
g) This telephone equipment is not intended to be
repaired and it contains no repairable parts. Opening
the equipment or any attempt to perform repairs
will void the warranty. For service or repairs, call
1-800-552-3368.
h) Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
i) If your home has specially wired alarm equipment
connected to the telephone line, ensure the instal-
lation of this telephone equipment does not disable
your alarm equipment. If you have questions about
what will disable alarm equipment, consult your
telephone company or a qualified installer.
j) This telephone equipment is hearing
aid compatible.
41