Transport, Storage; Care And Maintenance; Motor Protection Filter; Hepa Filter - Kärcher VC 6 Manuel D'utilisation

Transport, storage

 Hold the appliance at the carrying handle when you
want to transport it and store it in dry rooms.
Note: It is recommended that you first completely
push in the telescopic suction pipe.

Care and maintenance

Cleaning the device
 Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
 Clean the dust chamber with a dry wipe cloth/ dust
brush.
Replacing the filter bag
Order no. 6.904-329
Contents: 5 filter bags with cap and 1 engine protection
filter.
Note
Separate the telescopic suction pipe from the handle to
read the filter change indicator.
Illustration
 If the filter change indicator in the cover glows red,
then please change the filter bag.
 Use the closing lever and open the lid.
Illustration
 Unlock the holder of the filter bags and pull towards
the outside.
Illustration
 Close the filter bag using the closing flap, remove
the filter bag and dispose it off.
Illustration
 Push the new filter bag into the support until the
stop. First press the flap downwards; then push the
holder into the casing and lock it at the appliance
casing.
Change the motor protection filter
Motor protection filter: change before the last filter
bag is removed from the filter bag package.
 The motor protection filter is behind the inserted fil-
ter bag. Change the motor protection filter before
you insert the filter bag.
Illustration
 Unlock the frame and remove.
 Remove the lower part of the frame, take out old
engine protection filter and dispose it off. Insert the
new engine protection filter in the frame and re-
place the lower part of the frame.
Illustration
 Insert and click the frame into its place.
Replace HEPA filter
Order no. 6.414-805
Filter for pure blower air.
HEPA filter *: Change once a year.
Illustration
 Open cover.
 Unlock the HEPA filter and remove.
Illustration
 Insert the new HEPA filter and click it into place.
 Close the lid.
* EN1822:1998
10
Cleaning the floor nozzle
Clean the reversible floor nozzle at reglular intervals!
 Remove the nozzle from the suction pipe.

Cleaning the accessories

Illustration
 Handle and suction tube can be disconnected in or-
der to clean or if clogged. Push the 2 interlocks and
pull apart.
 Connect handle and suction tube and insert.

Technical specifications

Voltage
Current type
Mains fuse (slow-blow)
Protective class
Weight (without accessories)
Action radius
Dimensions
Nominal width, accessories
Sound pressure level (EN
60704-2-1)
Eco design as per 666/2013
Indicative annual energy con-
sumption
Rated power input
Dust intake on carpet
Dust intake on hard floor
Dust discharge
Sound power level L
Subject to technical modifications!
EN – 7
220 - 240
50/60
16
II
6,6
10
ø 380 x
380
35
57
25,8
600
82
104
0
72
WA
V
Hz
A
kg
m
mm
mm
dB(A)
kWh/a
W
%
%
%
dB(A)