Required Tools - Kärcher K 2.27 Manuel D'utilisation

ASSEMBLY INSTRUCTIONS

Required tools

Screwdriver, small size (not supplied)
for connecting high pressure hose and
trigger gun.
Assembly
STEP 1:

Insert wheels into the body of the unit.
STEP 2:

Slide the trigger gun holder into track
on the side of the pressure washer.
STEP 3:

Slide the transport handle into place.
STEP 4:

Install the supplied connector to the
unit's water inlet.
6 English
Note: Never attach the garden hose
connector to the unit's water inlet!
STEP 5:

Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-

ger gun and remove the high pres-
sure hose from the trigger gun.
OPERATING INSTRUCTIONS
STEP 1:

Connect the high pressure hose to
the unit's high pressure outlet.
STEP 2:

Insert the spray wand of your choice
into the trigger gun. Press in against