Table des Matières
Publicité
SAFETY INSTRUCTIONS
Warning: If a fault occurs, then any attempt to oper-
ate the drive before the safety shutdown is activated
may result in the desktop moving slightly. Please
take care to avoid possible danger of crushing!
Warning: The collision protection is inactive during
all reset processes (section 5). Please take care to
avoid possible danger of crushing!
Please note: If the product is visibly damaged, it
must not be installed or used!
24. After 2 minutes of continuous operation the system
automatically shuts itself off and cannot be used
for an additional 18 minutes. This keeps the motor
from overheating.
25. Do not exceed maximum load of
75 kg/100 kg.
26. Do not allow others to penetrate the table surface in
the cable box and in the cable tray, otherwise this will
result in electric shocks or short consequences.
27. Do not put your legs between fixed and moving parts
or on the right cable tray to create crushing and
shearing points.
11
Publicité
Table des Matières
