Using Your Air Fryer; Preheating - cosori CP137-AF Mode D'emploi

Masquer les pouces Voir aussi pour CP137-AF:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
Test Run
A test run will help you become familiar
with your air fryer, make sure it's working
correctly, and clean it of possible residues in
the process.
1.
Make sure the air fryer baskets are
empty and plug in the air fryer.
2.
Press Preheat. The display will show
"400°F" and
"5
MIN".
3.
Press
to begin preheating. When
preheating is done, the air fryer will
beep.
4.
Pull out the baskets and let them cool
for 5 minutes. Then place the empty
baskets back in the air fryer.
5.
Press
to select the
Steak
preset.
The display will show "400°F" and
"6
MIN".
6.
Press
Temp/Time
twice. The time will
blink on the display. Press the
once to change the time to 5 minutes.
7.
Press
to begin. When finished,
the air fryer will beep.
8.
Pull out the baskets. This time, let the
baskets cool completely for 10-
30 minutes.
12
Basket Tips
Only separate the baskets to clean or
after cooking.
The button guard protects the release
button from being pressed accidentally.
Slide the button guard forward to press
the basket release button. [
Never press the basket release button
while carrying the baskets.
Only press the basket release button
with the baskets resting flat on a
counter, or any level, heat-resistant
surface.
The handle is attached to the inner
basket, not the outer basket. [
2.2
] When you press the basket release
button, the outer basket will drop.
Note:
Do not unscrew the basket handle from
the baskets.
button
To order accessories, please contact
Customer Support (see page 24).
Figure 2.3

USING YOUR AIR FRYER

Preheating

We recommend preheating before placing food inside the air fryer, unless your air fryer is
already hot. Food will not cook thoroughly without preheating.
Figure 2.3
]
1.
Plug in. Press
2.
Press Preheat. The display will show "400°F" and
3.
Optionally, press the
adjust automatically.
Figure
4.
Press
5.
When preheating is done, the air fryer will beep 3 times. The display will show:
Note: If no buttons are pressed for 3 minutes, the air fryer will clear all settings and go into standby.
to turn on the air fryer.
"5
+
or
buttons to change the temperature. The time will
Temperature
Time
400°F / 205°C
5 minutes
390°F / 199°C
5 minutes
380°F / 193°C
5 minutes
370°F / 188°C
4 minutes
360°F / 182°C
4 minutes
350°F / 177°C
4 minutes
340°F / 171°C
4 minutes
330°F / 166°C
3 minutes
and below
to begin preheating.
EN
MIN".
13

Publicité

Table des Matières
loading

Table des Matières