When Using The Instrument; Symbols; Instructions; Cleaning - Metrix MX 350 Notice De Fonctionnement

Chapter II

1.1.2. When using the instrument

•
Never exceed the protection limit values indicated
in the specifications for each type of measure-
ment.
•
When the multimeter clamp is linked to the
measurement circuits, do not touch any unused
terminals.
•
Before changing the function, disconnect the
measurement leads from the circuit measured.
•
Never measure resistances on a live circuit.

1.1.3. Symbols

Refer to the user's manual
Risk of electric shock
Dual insulation

1.1.4. Instructions

- Before opening the instrument, disconnect it
from the measuring circuits and make sure that
you are not charged with static electricity, which
could irreparably damage the instrument's internal
elements.
A "qualified person" is someone who is familiar
-
with the installation, the construction, the
application and the dangers at hand. This
person is authorised to power up and power
down the installation and
compliance with safety regulations.

1.1.5. Cleaning

Clean the instrument with a damp cloth and soap.
Never use abrasive products or solvents.
MX 350 / MX 355
equipment, in
19