Settings Menu; Language Menu; Sensor Calibration Menu - Lofrans THETIS 7003 Manuel D'installation Et D'utilisation

www.lofrans.com

4.5 Settings menu

4.6 Language menu

Language
L a n g u a g e
E x i t

4.7 Sensor calibration menu

Standard Series Sensor Menu
(magnet and sensor placed on gypsy)
Gypsy Circumference
In this row the user must enter the circumference of the gypsy (in centimetres or inches).
Use the Table 1 provided to calculate the circumference.
Settable values: centimetres or inches.
Default value, 33 cm.
Select with
Select value with
Confirm with
Exit
To return to the settings menu.
Use the
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Back Light
By enabling this function it is possible to start the
display luminous intensity programming procedure
(default value 120 seconds).
Light Time
30
This function allows the user to set the backlight on
time during which the display remains lit after the last
command given (default value 30 seconds).
Keyboard Beep
This function allows the user to enable or disable the
buzzer (emitted each time a key is pressed).
Exit
To return to the settings menu.
Use the
Language*
The user may select the display language:
E n g l i s h
Italian, English, French, German, Spanish, Greek
Exit
To return to the settings menu.
*When the operator changes the language, the remote control will restart automatically.
(DOWN) or (UP) key to move around the parameters
(DOWN) or (UP) key to move around the parameters
Gypsy
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
= Yes = No
Confirm with
UK
Confirm with
Select with
Select value with
Confirm with
Confirm with
9