Check Menu; Usε; Measurement Reset - Lofrans GALAXY 703 Manuel D'installation Et D'utilisation

4.10 Check menu

Tests
Software Version
Operat. Time
Sensor Test
LCD Test
E x i t
5 USE
Press the (ON) key to activate controls and to switch on the display lighting. The display lighting switches off 60 seconds
after the last command given (adjustable default time – see "BkLight Time").
(UP) to control the anchor ascending
Press key
Press key (DOWN) to cast anchor
When any key is released (UP or DOWN) the corresponding action is stopped.

5.1 Measurement reset

To reset the measurement count simultaneously press the
Measurement reset may also be performed in the Measurement menu by selecting "Yes" in the Reset Measure row.
10
www.busse-yachtshop.de | info@busse-yachtshop.de
Use the (DOWN) or
Software Version
Indicates the version of the software installed.
Operation Time
Indicates the time the instrument operates
Sensor Test
The purpose of this function is to check the state
of the sensor:
3.0
Every pulse coming from receiver is momentary
0
displayed to the screen
LCD Test
This function switches on all the display's pixels
thus making it possible to perform a check on
them.
Exit
To return to the settings menu.
Measure
O f f
R e s e t M e a s u r e
U n i t s
E x i t
(UP) key to move around the parameters
V=11.6 Vdc
V=11.6 Vdc
(ON) and the (UP) keys for at least three seconds.
N o
F e e t
GALAXY 703
Select with
Sensor Test
Sensor Test
Confirm with
Select with
Confirm with
Confirm with