Lenze E84DGDVB 4 Serie Instructions De Montage page 79

Setting elements 0.37 ... 3 kW
The setting elements are located on the inner side of the drive unit.
Settings carried out via DIP1, DIP2, P2, P3, and P1 must be activated with DIP1/1.
The settings are accepted again at every mains connection. Thus, changes on
parameters made in the meantime may be overwritten.
0.37 ... 3 kW
Name
DIP1
DIP switch for commissioning
DIP2
P1 Setting "Top Cover: Speed ... %"
P2 Setting "Speed ... %", (speed)
P3 Setting "Ramp ... s", (acceleration/deceleration time)
X70 Connection for E94AZCUS USB diagnostic adapter or diagnosis terminal
0
LED status display
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 9−0
l
Settings 5
E84DG041
E84DG044
79