WELL™ Quad-M QRG
Control Panel
Description
Turn Product On
Turn Product Off
Tilt Angle
Passcode
Button
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
·
Turn the battery storage switch on.
·
Push the On/Off switch on the top for more than three seconds (the
built-in red LED will illuminate solid).
·
When not connected to the battery charger, the power status LED
indicates the amount of remaining battery charge, as follows:
Green:
Yellow:
Red:
·
Push the On/Off switch on the top for more than three seconds.
·
If storing the product for more than seven days after recharging it, also
turn the battery storage switch off.
·
Place the product on a flat, sturdy surface.
·
Release the extensible foot by shifting the foot release lever.
·
Keep the lever shifted to adjust the angle and release the lever.
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
>70%
(100~70% charge)
>20%
(69~21% charge)
Empty
(20%~0 charge)
6
Function
EN