Replacing Light Bulbs; Bottom View - Zephyr Tornado II AK8200AS Guide D'utilisation, D'entretien Et D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REPLACING LIGHT BULBS

CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and
falls out.
If bulbs are difficult to turn due to prolonged use, firmly attach a glass suction cup approximately the
diameter of the bulb or use a rubber/latex glove and turn counter clockwise.
Replacement bulbs are available at the Zephyr online parts store. See page 19 for ordering information.
Bottom View
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tornado iii ak8300asx

Table des Matières